5
Deco 330
Changing External Parts (5) Base Unit
Base
To remove:
1 Remove the Belt cover. (See page 2)
2 Remove Screws (A)
(4 pcs.), and remove the base
unit .
3 Disconnect the X Motor
and Y Motor
connectors
from the printed circuit board (A).
Screws (A)
X-motor connector (Blue)
Y- motor connector (White)
Extension table (Accessory)
To attach:
4 Connect the X, Y - Motor Connectors
,
to the
printed circuit board (A).
5 Insert the X, Y - Motor cords between the printed
cuircuit board (A) and Arm.
Make sure that the cords should not be caught between
the arm and base unit when attaching it, then tighten
Screws
(4 pieces) temporarily.
6 Attach the Extension (Accessory) table
.
7 Tighten Screws (A)
while aligning the extension
table, base unit and free Arm.
8 Attach the belt cover.
1
2
3
1
1
2
3
1
4
1
2
3
4
1
1
2
3
4
Содержание deco 330
Страница 1: ...SERVICE MANUAL PARTS LIST Deco 330...
