26
Deco 330
Adjusting X and Y Sensors
To adjust X and Y sensors:
1 Turn the power switch “ON” (The carriage is
automatically set at starting position.)
2 Turn the power switch “OFF” and then remove the
base unit.
3 Loosen Screw A
and move the Y-Sensor fixing
plate
to adjust the carriage position.
Turn the power switch “ON” again to check if the
Distance (Y) 2 is adjusted to 2.5 mm.
Tighten Screw (A) 1 .
4 Loosen screw B 4 and move the X-shield plate
to adjust the carriage position (X-1) 5 and
(X-2) 6 .
Turn the power switch “ON” again to check if the
distance (X-1) 5 is adjusted to 69.5 mm and
(X-2) 6 is adjusted to 2.5 mm.
5 Tighten Screw 4 .
6. Attach the base.
1
2
3
4
5
7
6
1
3
7
Screw (A)
Y (2.5 mm)
Y Sensor fixing plate
Screw (B)
X-1 (69.5 mm)
X-2 (2.5 mm) between the edge of carriage
and Base
X shield plate
1
6
7
2
4
5
3
Содержание deco 330
Страница 1: ...SERVICE MANUAL PARTS LIST Deco 330...
