manualshive.com logo in svg

Bernina artista 170 QPE, Руководство владельца

Поделиться
Скачать
Bernina artista 170 QPE Скачать руководство пользователя страница 48

M

ASTERING

 Y

OUR

 

BERNINA

®

1/10/02

artista 

170 QPE/180

/48

BERNINA

®

 

artista 

170 QPE/180

M

ASTERING

Y

OUR

BERNINA

®

STITCH COUNTER BUTTONHOLES

Fabric:

Heavy flannel, 6” x 6”

Stabilizer:

1 piece, 3” x 6”

Needle:

90/14 Embroidery

Thread:

30 weight cotton embroidery

Presser Foot:

Standard Buttonhole Foot #3/3C

Owner’s manual pg.____
• Fold the fabric in half to 3” x 6”.
• Mark a parallel line 2” from the fold and a second one 1” from the fold.
• Mark two lines perpendicular to the fold, spacing them about 2” apart.
• Select standard buttonhole #51.

• 

Touch the “presser foot 3” symbol on the function bar.

• Position the beginning of the buttonhole on the line closest to the fold, aligning the fold with
  the 

5

/

8

” marking behind the foot.

• Sew the first bead and stop stitching at the second line.
• Press the quick reverse button - as you stitch, the bottom bartack and second bead are sewn.
• Stop the machine even with the first stitch of the first bead - press quick reverse.
• The machine sews the top bartack, ties the stitches off and stops automatically.
• Auto appears on the screen and the buttonhole is programmed.
      Notes:

- The first bead is sewn forward, the second bead backward.
- The buttonhole must be reprogrammed after altering stitch length, width
   or balance.
- Practice using the fabric and stabilizer to be used in the finished project.
- Stitch buttonholes at consistent speed.

 • Trim threads close and mount the sample.

Содержание artista 170 QPE




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды