manualshive.com logo in svg

Bernina artista 170 QPE, Руководство владельца

Поделиться
Скачать
Bernina artista 170 QPE Скачать руководство пользователя страница 15

M

ASTERING

 Y

OUR

 

BERNINA

®

1/10/02

artista 

170 QPE/180

/15

BERNINA

®

 

artista 

170 QPE/180

M

ASTERING

Y

OUR

BERNINA

®

ALTERED MEMORY

Fabric:

Firm fabric – 6” x 6”

Needle:

90/14 Embroidery

Thread:

30 wt. cotton embroidery

Presser Foot:

Reverse Pattern Foot #1/1C

Owner’s manual pg.____

• Fold fabric to 3” x 6”.
• Select stitch #407.
• Sew a row of stitching as programmed down the center of the sample.
• Alter stitch length to 1mm and sew a 2nd row on one side of the first row.
• Touch CLR - this clears alterations made to the selected stitch only.
• Select stitch #2 - (the one used for satin stitching in the previous exercise).
   Notice the computer remembered all the changes made to the stitch.
• Select stitch #407 again.
• Alter stitch width to 3.5mm (170 QPE) or stitch 6mm (180) and sew a 3rd row on
  the other side of the first row.
• Touch CLR ALL- notice the alterations made are gone.
• Select stitch #2 again - notice the changes made to it are gone also. CLR ALL
   returns all stitch alterations back to default settings.
• The computer will remember any and all stitches you alter, as long as the clear
  buttons are not used and as long as the machine is not turned off.

RETURNING TO BASIC SETTINGS
• Three options:

1. Press the external CLR button
2. Touch the CLR ALL function.
3.  Manually set changes back to the basic mark

Содержание artista 170 QPE




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды