manualshive.com logo in svg

Bernina 570 QE, Руководство пользователя

Поделиться
Скачать
Bernina 570 QE Скачать руководство пользователя страница 170

Errors and Faults

170

18 Errors and Faults

18.1 Error Messages

Message on the Display

Cause

Repair

Stitch number unknown.

> Check the entry and enter the new number.

Selection of stitch patterns not
possible in combi-mode.

> Combine other stitch patterns.

The feed dog is not lowered.

> To lower the feed dog, push the button «Feed Dog Up/

Down».

The selected needle and stitch
plate cannot be used in
combination.

> Replace the needle.
> Replace the stitch plate.

The needle is not at its top end.

> Adjust the needle position via the handwheel.

The upper thread is used up.

> Rethread.

The upper thread has broken.

> Rethread.

The bobbin thread is used up.

> Rethread.

The bobbin thread has broken.

> Clean the hook.
> Rethread.

Содержание 570 QE























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды