Bernina 475 QE, Руководство пользователя

Страница: 116 / 126

Errors and faults
116
Fault Cause Solution
Upper thread breaks Incorrect needle/thread
combination. > Match the needle with the thread size.
Upper thread is too tight. > Reduce the upper thread tension.
Incorrectly threaded. > Rethread.
Poor quality thread. > Use quality thread.
The stitch plate or the hook tip is
damaged. > Contact the nearest specialized BERNINA dealer to have
the damages repaired.
> Replace the stitch plate.
The thread is caught in the area
of the Thread Take-up Lever.
1
> Slide the service cover (1) to the left, then remove the
service cover.
> Remove the thread remnants.
> Guide the 4 knobs of the service cover into the provided
recesses and slide the service cover to the right.
Lower thread breaks The bobbin case is damaged. > Replace the bobbin case.
The stitch hole in the Stitch Plate
damaged. > Contact the nearest specialized BERNINA dealer to have
the damages repaired.
> Replace the stitch plate.
Needle blunt or bent. > Replace the needle.
Needle breaks
The needle is incorrectly inserted. > Insert the needle with the flat side to the back as far up
as it will go into the needle holder and tighten the
screw.
The fabric has been pulled. > Feed the fabric evenly.
Thick fabric has been pushed. > Use a suitable presser foot, e. g. Jeans Foot #8, for thick
fabric.
> Use the height compensating tool when sewing over a
thick seam.
Knotted thread. > Use quality thread.
Stitch width not adjustable
The selected needle and stitch
plate cannot be used in
combination. > Replace the needle.
> Replace the stitch plate.