Bernina 475 QE, Руководство пользователя

Страница: 113 / 126

Errors and faults
113
Message on the display Cause Solution
No personal data on the
BERNINA USB stick (optional
accessory). No personal data for recovery
available on the BERNINA USB
stick (optional accessory). > Make sure that the data and settings have been saved
on the BERNINA USB stick (optional accessory).
The recovery of personal data has
failed. The firmware update has been
successful but the personal data
could not be recovered. > Make sure that the data and settings have been saved
on the BERNINA USB stick (optional accessory).
> Transfer saved data to the machine.
No BERNINA USB stick is inserted.
Make sure that the same
BERNINA USB stick remains
connected during the entire
automatic update process. The BERNINA USB stick (optional
accessory) is not inserted. > Use a BERNINA USB stick (optional accessory) which
provides enough free capacity.
The firmware update has failed. The latest firmware version
cannot be found on the USB
stick. > Make sure that the compressed zip file has been
unzipped for the firmware update.
> Check whether the data for the software update is
saved directly on the data medium and not in a file on
the USB stick.
> Updating Firmware.
The machine must be cleaned/
lubricated. > Clean the machine.
> Lubricate the hook.
Important information on lubricating: Too much oil may
stain the fabric and the thread.
> After lubricating, always embroider on a test piece.
The automatic thread cutter (at
the thread catcher) needs
cleaning. The automatic thread cutter
needs cleaning. The message
appears every time when the
machine is started as soon as
1000 cutting cycles have been
carried out. > Tap «Confirm».
– The machine calls up the function «Clean the thread
catcher».
> Clean the thread catcher according to the instructions
on the display.
–
The counter for the cutting cycles is reset.