Bernina 475 QE, Руководство пользователя

Страница: 104 / 126

BERNINA Stitch Regulator (BSR)
(optional accessory)
104
> Insert the plug for the cable vertically into the BSR connection (1) until you feel it click into place.
> Switch the machine on.
– The BSR display opens and the BSR 1 mode is activated.
Changing the presser foot sole
NOTICE
The lens of the BSR presser foot is dirty
The machine doesn't recognize the BSR presser foot.
> Clean the lens with a soft, slightly damp cloth.
> Raise the needle.
> Raise the BSR foot.
> Switch the machine off and disconnect it from the power supply system.
> Remove the BSR foot from the machine.
> Press both push buttons at the BSR foot against each other.
> Pull the presser foot sole out of the guide downwards.
> Insert the new presser foot sole into the guide and push upwards until it clicks into place.
> Attach the BSR presser foot.
11.6 Using the BSR mode
The BSR function can either be operated via the foot control or via the button «Start/Stop».
Start via the Foot Control: The foot control must be pressed down while quilting is in progress. The machine
keeps running in BSR Mode 1 until the foot control is released, even if the fabric is not moved.
If quilting in BSR Mode 2 is stopped, the machine sews another stitch depending on the needle position and
stops with needle position up.
Prerequisite:
• The Slide-on Table has been fitted.
• The Knee Lifter of the Free Hand System is attached.
> Lower the feed dog.
> Select the desired BSR Mode.