BERNHARDT design a.k.a. C-base, Инструкция по эксплуатации, Страница: 15 / 20

1
2
Front
a.k.a. overhead loop support
and tower deck assembly
This illustration shows the assembly of the
deck structure to the loop or panel end
support.
Stand the bottom assembly with the wood
deck panel and its end upright either on
the floor or on the worksurface where you
can get easy access to the connectors.
Step 1 is to lift the overhead above the
bottom deck assembly and push it slightly
behind the assembly. Rest the overhead
on the loop support with the Mod-eez®
posts aligned in Mod-eez® clips.
Step 2 is to push the loop support back
until the posts lock into the clips and the
front of the overhead aligns with the front
of the support.
If assembling one side of the overhead to
a tower be sure to support that end while
assembling the support to the overhead.
Worksurface tower cabinet shown in the
background. See the next page for your
final step in completing this assembly.
Back of overhead
Overhead cabinet