BERNHARDT design a.k.a. C-base, Инструкция по эксплуатации, Страница: 13 / 20

Step 1
Step 2
1
2
Wood Deck Panel
Wood Deck Panel
a.k.a. overhead loop support
and tower deck assembly
\
These illustrations show the final assembly
process of the wood deck panel to a
tower.
If another support end is specified in the
place of the tower shown, just repeat the
procedure from page 1.
In step 1 take the wood deck panel / loop
panel end assembly and lift it up so that it
will engage into the Mod-eez® clips.
Once the assembly is engaged in the clips
then step 2 is to push this assembly down
carfully until the posts and clips are fully
engaged and locked into place.
Mod-eez® clip installed into the end of the
wood deck panel.
Completed bottom assembly
Next step is the installation of the
overhead cabinet.