EXPRESS DUAL 3000MC
© Bernhard and Company Limited
20
6.7.7 On each counter, press the blue “reset” button to
“zero” the display (zero the grinder to the reel).
6.7.8 Winding the hand handwheel will make counter
readout increase or decrease in value.
6.7.9 Wind both handwheels so that both counters read
the same feed is balanced (PARALLEL) - no taper
has been applied.
NOTE:
It is important that the control wheels are moved
equally.
6.7.10. Apply a good hard cut. Do not be afraid of the
aggressive nature of the grinding process.
6.8
When Is The Job Done?
6.8.1 You will hear the cut begin to run out - a rough guide of cutting times will be:
Fairway Units
12–20 minutes
Medium Triple Units
10–15 minutes
Greens & Hand Mowers
8–10 minutes
6.8.2 Now take off the cut by simultaneously moving both hand wheels anti-clockwise, when the
stone is at one end of its traverse, until the grinding wheel is clear of the reel.
6.8.3 Push the total / “E”- stop button.
NOTE
NEVER
stop the machine while the grinding wheel and reel are in contact except in an
emergency. Never allow the grinding wheel and reel to spark out. If this does happen put
another cut on for a few more passes.
6. In-frame Grinding
(Continued)
Reset button:
1
st
push = zero to reel
2
nd
push = absolute position
Содержание EXPRESS DUAL 3000MC
