Berner BI1EG2.5B, Руководство пользователя

Страница: 6 / 44

Page 5 of 44 17.07.2014
Ver. 3.3 © Berner Kochsysteme 2015
-
Attention! Cookware has to be placed only with the complete dimensions on the marked
position on the cooking zone.
-
Don´t place hot cook ware on the control panels, displays or frames of the unit. To ignore
the points, follows to damages of the unit and the cookware. Consequence of ignore:
The warm Cookware burning the seal material and the material get destroyed. This result
humidity and grease can penetrate in the equipment and can result in the defect of the
Equipment and raise the risk of an electric shock. Cookware will be welded together with
the surface or frame. Overheating of the displays and control surfaces leads to damages.
-
If the ceramic glass is cracked or broken, the induction unit must be turned off and
disconnected completely from the main supply. Do not touch any parts inside the induction
unit.
-
Please beware of hot foods and liquids.
-
PLEASE NOTE: Warning of potentially slippery surfaces in the vicinity of the device. This
can lead to injury.
-
To prevent overheating and heating up of empty cookware, never leave them unattended.
-
Turn off the heating zone when you take away the pan for a longer period of time. This
way, the heating process doesn’t restart automatically as soon as a pan is put on the
heating zone again. As a result, the pan will not be heated inadvertently, i.e., if someone
wants to use the induction unit, they must first start the heating process by turn the unit
‘ON’.
-
Don`t use the cooking zone as a working surface!
-
Do not put paper, carton, textiles, etc. between the pan and the ceramic hob – they could
catch fire. Aluminium foil and plastic containers may not be placed on the hot surfaces.
-
Don`t place metal objects on the cooking zone. They can heat up very quickly if they get
directly in contact with the turned on heating zone, never place other objects than pans on
the induction unit (closed cans, aluminium foil, cutlery, jewellery, watches, etc.)
-
After use, turn the unit off with the main switch. Do not rely on the pan detection.
-
Do not place credit cards, phone cards, cassettes, or other magnet-sensitive objects on the
ceramic hob.
-
Use only recommended types and sizes of cookware.
-
The induction unit is equipped with an internal air cooling system. Avoid blocking the air
inlet and outlet areas with objects (e.g. textiles). This would cause, to overheat and switch
off, the unit.
-
Prevent liquids from entering the equipment, and try not to let water or food flow over the
pan edge. Do not jet-clean the equipment.
Improper operation
The working of the induction equipment can only be guaranteed when it’s used correctly. The
equipment must always be operated within the limits given in the technical data.
Modification / use of spare parts
Contact the manufacturer if you intend to make any modifications to the equipment. For
safety reasons, always use original parts and accessories only which have been approved by
the manufacturer. If you use anything other than the original components, the manufacturer
will not assume any liability for any costs that result. Attention! During disassembly,
inspections or repairs look for stability of the unit.
Attention! In case of replacements of parts the induction device must be “visible
disconnected" from the power supply.