Berner 052872, Инструкция по эксплуатации/Инструкция по безопасности

Страница: 8 / 56

Grinding wheel mounting dangers:
y
Correct grinding wheel mounting is necessary to prevent injury from broken wheels.
y
Do not use chipped or cracked grinding wheels.
y
Grinding wheels should be a free fit on the spindle to prevent stress at the hole.
y
Use only wheel collars that come with the grinder for mounting the grinding wheel. Flat
washers or other adapters may over stress the wheel.
y
Always use heavy paper blotter discs between the wheel collars and the grinding wheel.
y
Do not wear jewelled or loose clothing and avoid long hair.
y
Choking can happen if neckwear is not kept away form tool and accessories.
y
Tighten the wheel on the spindle to prevent spin off when the air grinder is turned off.
y
Before grinding, test grinding wheel by briefly running tool at full throttle. Be sure to use a
barrier (such as under a heavy work table ) to stoop any possible broken wheel parts.
y
Avoid direct contact with accessories during and after use. Gloves will reduce the risk of
cuts or burns.
y
Use only proper accessories retainers (see parts list).
Tool applications:
y
Grinder : For use with bonded abrasive mounted point grinding wheels.
Steel rotary files and carbide burrs providing their speed rating
matches that of the grinder.
Projectile hazards:
y
Even small projectiles can injure eyes and lead to blindness.
y
Always wear impact-resistant eye and face protection when involved with or near the
operation, repair or maintenance of the tool or changing accessories on the tool.
y
Use only grinding wheels with the correct shaft diameter.
y
Ensure all others in the area are wearing impact-resistant eye goggles and face masks.
y
A grinder wheel that bursts can cause very serious injury.
y
Never use a grinding wheel marked with a speed lower than the air grinder speed.
y
In case the air tool gives a strong vibration, replace then a soon as possible the grinder
wheel, probably is the grinding wheel damaged.
Workplace hazards:
y
Maintain a balanced body position and secure footing.
y
High sound levels can lead to permanent hearing loss. Use hearing protection as
recommended.
y
Avoid breathing in dust or handling debris from work process which can be harmful to
your health.
y
This tool is not intended for use in explosive atmospheres and is not insulated for
contact with electric power sources.
Additional safety topics:
y
Be prepared that the material your tool is made always can have material tiredness.
y
Be aware that working with air tools cause high vibration so special precautions should
be taken.
y
This tool and its accessories must not be modified.
y
Never use this tool in explosive atmospheres.
Explanation of the pictograms:
y
Always use hearing protection.
y
Always use face protection.