24
8.2 > CLOCK
You can set up date and time only if you are logged in Maintenance account. To see how to log in
refer to part 10.1. Log in access. From the home page touch the date, the Set up Clock Screen will
appear. Touch the box corresponding to the parameter you want to change and validate the modi-
fication by pressing the F2 button or by touching the Clock update button.
*
9 > SETTING UP THE ACTUATORS
9.1 > ACTIVATE THE ACTUATORS
The first thing you have to do is to activate the actuator
on the Master Station to establish the communication
between those. Before activating the actuator, make sure
it is correctly cabled and connected and its slave address
is correctly set up.
To access to the Activate Screen you must be logged
in with a Maintenance account. To see how log in refer to
part 10.1. Log in access.
Then, from the home page touch the Valve selection
button or press the F3 button.
Now a list of valves is displayed. The valves are presented
by list of ten with a number and a Tag number. Twelve
pages are necessary to display the 120 valves. You can
navigate through these pages by pressing the Left and
the Right arrow or by pressing respectively F1 or F4.
Note:
The number of the valve you will activate must corresponds to the slave address number
minus 2 (For example, valve number 1 will have 3 as slave address, valve number 2 will have 4 as
slave address...).
Содержание MS102
Страница 1: ...INSTRUCTIONS FOR START UP NR 1182_rev A MASTER STATION MS102...
Страница 47: ...47 NOTES...