berlinger SmartMonitor SHIP L, Руководство пользователя, Страница: 44 / 75

7.2. Shipment
Berlinger offers a range of external sensors compatible with the SmartMonitor. All sensor types are
connected following the below steps.
Make sure that the sensor is properly connected to the device. Do not tighten the connector with pliers or
any other tool, otherwise the connector may be damaged.
If the SmartMonitor has been configured with a SmartSensor in SmartView, it will indicate the status
accordingly on the device display upon SmartMonitor set up (
SENSOR OK vs. SENSOR NOT OK ). (For
more information please see chapter WARNINGS ).
How to place and connect the external sensor to SmartMonitor
Step Picture Description
1
Place the SmartMonitor outside the temperature-controlled box/container
(2) and the external sensor inside (1) and wait for it to acclimatize.
! The cable of the external sensor should be placed in such a way that it
does not interfere with the daily handling, in order to avoid the risk of the
external sensor to be disconnected from the device.
Place it in a way:
* that does not obstruct with the box/container opening
* that accurate temperature monitoring is possible. The external sensor
should be away from the lid or the door.
2
To connect an external sensor to the SmartMonitor, remove the grey cap
at the right side of the SmartMonitor device.
3
Align the sensor plug with the sensor socket. Ensure the Berlinger eye (
) is facing the same direction as the SmartMonitor device display.
Now plug in sensor into sensor plug.
Warning: Do not apply force as it can damage the connector on the device
and/or external sensor.
NOTE: Use only original Berlinger external sensors for SmartMonitor devices.
*
Berlinger & Co. AG User Manual SmartMonitor - 1_en
Page 41 of 72