berlinger SmartMonitor SHIP L, Руководство пользователя

Страница: 42 / 75

7.1. Site
Berlinger offers a range of external sensors compatible with the SmartMonitor. All sensor types are
connected following the below steps.
Make sure that the sensor is properly connected to the device. Do not tighten the connector with pliers or
any other tool, otherwise the connector may be damaged.
If the SmartMonitor has been configured with a SmartSensor in SmartView, it will indicate the status
accordingly on the device display upon SmartMonitor set up (
SENSOR OK vs. SENSOR NOT OK ) (For
more information please see chapter WARNINGS ).
How to place and connect the external sensor to SmartMonitor
Step Picture Description
1
Place the SmartMonitor outside the refrigerator/freezer (2) and the external
sensor inside the refrigerator/freezer (1) and wait for it to acclimatize.
! The cable of the external sensor should be placed in such a way that it
does not interfere with the daily handling of the personnel, or the cable can
be disconnected.
2
Connect the USB cable of the SmartMonitor power adapter to the right of
the SmartMonitor.
3
Plug the power adapter of the SmartMonitor into the power socket for
permanent charging.
! Ensure that the cable does not represent a tripping hazard.
! Ensure that the cable cannot easily be disconnected as PERMANENT
CHARGING is required for the SmartMonitor SITE L.
The SmartMonitor is monitoring the environment temperature, whereas the external
sensor is monitoring the refrigerator/freezer temperature.
*
NOTE: Use only original Berlinger external sensors for SmartMonitor devices.
*
Berlinger & Co. AG User Manual SmartMonitor - 1_en
Page 39 of 72