Firmly tap bolts into pre-drilled
holes before tightening.
CORRECT IN
CORRECT
1
2
3
4
5
Use to measure bolts
First slide the Glider Bracket onto the 5/16”x2-1/2” Allen
Head Bolt, secondly slide the round 5/16” Aluminum
spacer onto the Allen Head Bolt, positioning the alu-
minum spacer beside the glider bracket . Once this
sequence is complete place the bolt into the pre-drilled
holes on swivel glider base.
Firmly tighten the Allen Head Bolt with the 5/16” lock
nut and place the 5/16” cap nut at the end of bolt se-
quence.
Repeat this step for the remaining glider brackets.
5/16X2-1/2” Allen Head Bolt
Glider Bracket
5/16” Aluminum Spacer
5/16” Lock Nut
5/16”Acorn Nut
First slide the Glider Base underneath
the Glider Chair, ensuring the correct
end of the base is pointed forward (see
photo). Then lift the Glider Brackets
onto the 5/16" x 21/2"Allen Head Bolts
previously installed onto the Glider
Legs. Secondly Using 4- 5/16" Lock Nuts,
secure Glider Bracket onto the
Bolt securing the bracket next the flange
nut (leg side) and lock nut (outside).
Repeat this step on the remaing glider
brackets.
5/16X2-1/2” Allen Head Bolt
5/16” Flange Nut Nut
Glider Bracket
5/16” Lock Nut
Your Chair is Complete!
Back of Base
Front of Base
