STEP #1 -
Fasten the two Cross Supports to the Base
using 8- 1/4" x 2" Allen Head Bolts and 8-
1/4" Flange Nuts.
STEP #3 -
Locate the predrilled holes located on
outside edge of glider base and install glide
assembly (see next step).
STEP #2 - Attach the four Glider Stops to the Base
using 4- 1/4" x 3" Allen Head Bolts and
4- 1/4" Flange Nuts. Insert the Allen Head
Bolts into the Poly Glider stops and place
into pre-drilled holes on base. Firmly
fasten with the a 1/4" flange nut.
Assembly Directions for
Glider Base
1/4" x 2" Allen Head Bolts
1/4" x 3" Allen Head Bolts
Front of Base
Back of Base
