STEP #3 -
Using 4- 5/16" x 21/2" Allen Head Bolts,
place them into the pre-drilled holes in the
bottom of the legs and tighten using 4- 5/16"
Flange Nuts. (Ensure the Bolts are pointing
inwards.)
5/16" x 21/2" Allen Head Bolts
Assembly Directions for
Glider Chair
Step #1
Fasten the Arm and Leg Assembly to the Seat
and Back using 1/4” Allen Head Bolts (size is
specified below). Using a hammer, firmly tap the
Bolts until they are flush with the poly surface.
Securely tighten using 1/4” Flange Nuts.
1/4” x 3” Allen Head Bolt
1/4” x 31/2” Allen Head Bolt
1/4” x 41/2” Allen Head Bolt
Step #2
Turn the chair on the other side and repeat
Step #1.
1/4” x 3” Allen Head Bolt
1/4” x 31/2” Allen Head Bolt
1/4” x 41/2” Allen Head Bolt
Step #1
Step #2
