Thermostat NO contact with centre plate, time-controlled
G9
ENERGY-
CONSUMTION TO
DATE
Display of the approximate calculated energy consumption/operating
hours for
2 DAYS – WEEK – 30 DAYS – YEAR
.
The current day until the display time is taken into account.
Calculation: Duty cycle of the heating x COSTS/h
Select time period for calculating the energy consumption:
+/–
Return to the menu:
OK
Resetting using
INSTALLER SETTINGS H9
G10
SET TEMP TO
READ
Setting whether the setpoint temperature should be displayed in the
basic display instead of the current room temperature
Work setting:
NO
– room temperature display
Select:
YES/NO
:
+/–
, press
OK
to confirm
G11
ADJUST TEMP
Determining the correction value by which the measured temperature
should be corrected for display and controller
Sensible adjustments: e.g. alignment with calibrated thermometers,
compensation of installation heights and installation locations that
are not optimum
Factory setting:
0.0
- no correction
Adjust correction value:
+/–
, press
OK
to confirm
G12
NUMBER FOR
FLOOR
TEMPERATURE
Only when using as floor temperature controller!
Activating the display of the floor temperature as information number
The display °C is hidden
Factory setting:
NO
(normal temperature display)
Select:
YES/NO
:
+/–
, press
OK
to confirm
G13
BACKLIGHT
Adjusting the display lighting:
SHORT
= on for a short time after pressing push-button,
OFF
= permanently off
Factory setting:
SHORT
Set lighting behaviour:
+/–
, press
OK
to confirm
G14
LANGUAGE
Selection of the language for the display text in the display:
DEUTSCH,
ENGLISH
,
NEDERLANDS,
FRANCAIS
Select language:
+/–
, press
OK
to confirm
G15
INFO
Display of the controller type and controller version
Return to menu:
OK
G16
RESET USER
SETTINGS ONLY
Resetting the user settings to factory settings
The
counter
ENERGY-CONSUMTION TO DATE
is not reset. The
settings are reset via menu
H9
.
Select:
YES
(Reset)/
NO
:
+/–
, press
OK
to confirm
Table 2: Overview of the user settings and their selection
Invoking settings menu
The display shows
G1 - PROGRAM SELECT ONE
.
Select the desired menu using
+/–
.
A menu identification and help text are shown at the bottom of the display (12).
Press
OK
.
The first adjustable value flashes in the display.
Adjust the desired value using
+/–
.
Press
OK
.
97-09920-000
Page 9/15
10/2011
