Berkeley SentryHound-Pro, Руководство пользователя

Страница: 7 / 19

6
Controlling SentryHound-Pro
SentryHound-Pro buttons are color-coded to match the color of the LED alerts and configuration modes in the
pole. Some of these buttons require holding down in combinations to enter into different detection
configurations. Consult this manual fully or the included quick start guide for more details.
ON/OFF Button – Push this button to power on SentryHound-Pro. Hold button in for 3 seconds to
power the unit back off.
BATTERY LEVEL – Push this button to check the level of the internal battery. The alert zones
on the pole light up to from the bottom to the top to indicate 25%, 50%, 75% or 100% capacity.
CALIBRATION – Push this button to calibrate the unit at any time. The process takes about 30
seconds. You should also push this button if the unit is moved to a different location while still
powered on.
SENSITIVITY – Push this button adjust detection sensitivity. The higher the sensitivity setting
(more LEDs lit on the pole) the more the unit is prone to false triggers.
ALERT – Push this button to cycle through various alert audio and visual durations.
KEY – Turn and remove this key to lock or unlock the unit to prevent tampering. When in the
locked position, all settings are static (including main power) and cannot be changed until key
is inserted and turned back to the unlock position.
DRY TRIGGER CONTACT – Connect this contact to an external speaker, camera, DVR or
visual alert to add additional functionality each time the unit is triggered by ferrous detection.
USB – This port allows the unit firmware to be updated. Be sure to consult with
support@bvsystems.com for upgrade steps before performing any update to your unit.
MOTION SENSOR / INFRARED SENSOR – Be sure that unit bases (single or dual pole
configurations) are free from obstructions so that these sensors can detect motion and
communicate between bases during setup procedures.
POWER INPUT – Use only the provided AC adapter to power and charge the unit here.