Berkel BS+2020F, Руководство по эксплуатации и техническому обслуживанию

Страница: 31 / 40

10
Even if the machine accidentally stops, as for in-
stance due to a power outage, if electrical power is
supplied again to the machine, it will not cause the
machine to restart, but the operator will instead
have to press the start button (Picture 1.8.1).
3 Sliding blade protection, it allows the adjustment
of cutting height according to the product thickness
1.9 - Warning and danger signs
Never move your hands close to the blade, especially when it is moving.
There is serious risk of severe personal injury. If the machine is hooked to the
power grid, do not touch its electrical components. Risk of electrocution.
Heed the warnings on the labels. Failure to follow their instructions may
cause personal injuries, even lethal. Make sure that the labels are always in
place and clearly legible. If not, re-apply or replace them.
Fig.1.8.1
2
1
3
Fig.1.9.1
D
G
E
C
B
A
Fig.1.9.2
A
B
C
D
G F E
31
EN
7.7.2 - Cleaning the machine
- Wear a pair of gloves that are suitable to handle
sharp objects
- Loosen the blade’s tensioning by loweing gear “1”.
- Grab blade “2” and slip it off the pulley as shown in
Pic. 7.7.2 and Pic. 7.7.3
- Remove all scrapers “9” and wash them with
detergent pH 7.
- After having taken off all the dismountable parts,
you will to clean, using a sponge soaked in
detergent pH 7.
- Rinse all the components so as to get rid of any
left-over detergent and proceed to reassemble them,
repeating the procedure in its reverse order.
Pic. 7.7.1
Pic. 7.7.4
9
Pic 7.7.2
Pic. 7.7.3
2