Berkel BS+2020F, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 40

12
2 - Technical characteristics
2.1 - Main components
In order to help the operator understand the contents of this manual, Picture 2.1.1
below lists and depicts the main components of the machine.
1 - Pulleys protection casing in stainless steel AISI 304
2 - Control panel.
3 - Portioning device in stainless steel AISI 304
4 - Pusher in stainless steel AISI 304
5 - Work top in stainless steel AISI 304
6 - Electrical motor.
7 - Upper driven pulley in polished aluminium G-AlMg3
8 - Telescopic blade protection are made of stainless steel AISI 304
9 - Dirt and rest collection tray ar e made of stainless steel AISI 304
10 - Lower drive pulley polished aluminium G-AlMg3
11 - Electrical system.
12 - Body machine are made of stainless steel AISI 304
13 - Lever for the assembly blade.
14 - Alimentary plastic blade scraper
15 - Blade guide insert in hardened steel
16 - Band cutting blade in carbon steel C95
2.2 - Technical data
MOTOR PULLEY BLADE LENGTH WORKBENCH
Hp / rpm mm mm mm
1,5 250 2020 475 x 490
Fig.2.1.1
1
7
3
9
10
4
5
2
6
13
12
11
14
8
16
15
29
EN
3
Grab the blade packet
with one hand protect-
ed by the glove, as
shown in the picture to
the right...
4
… and with the other
hand, also protected by
a glove, loosen the
clamp that fastens the
blades, until it comes
off.
5
Grab the blade packet
with both hands and
open it apart until the
blades are fully stret-
ched. .
6
Grab the blade again
with one hand….
7
…and with the other
hand, loosen and slip
the other clamp off too.