Berkel BM +32F, Руководство по эксплуатации и обслуживанию

Страница: 23 / 84

7
1.6 - Forbidden uses
The machine must only be used for purposes foreseen by the manufacturer, in
particular:
-
Do not use the machine to grind food products different from meat or the like.
- Do not use the machine if it has not been correctly installed with all the
protections intact and correctly assembled to avoid the risk of severe personal
injury.
-
Do not access electrical components without having previously disconnected the
machine from the electrical supply: risk of electrocution .
-
Do not work with products that are larger than what can completely fit inside the
loading hopper.
-
Do not wear clothing that does not conform with accident prevention laws.
Consult the employer for safety prescriptions in force and safety devices to be
used.
-
Do not start the machine if it is not working correctly.
-
Before using the machine make sure that any condition which endangers safety
has been opportunely eliminated. If any irregularity occurs, stop the machine and
notify the head of maintenance.
-
Do not allow unauthorized personnel to operate the machine.
Emergency treatment in case of accident caused by the electrical current, first
remove the victim from the conductor (as he will usually be unconscious).
This operation is dangerous as the victim is a conductor in this case and
touching him can cause electrocution.
You should therefore disconnect the contact directly from the power line supply
valve or, if this is not possible, distance the victim using insulating material
(wooden or pvc sticks, fabric, leather, etc.). A doctor should be promptly called
and the patient taken to the hospital.
1.7 - Machine information
An exact description of the " Model ", the " Serial number " and the " Year of
manufacturing " of the machine will facilitate fast and efficient responses on behalf
of our servicing department. It is advisable to indicate the model of the machine
and the serial number each time you contact the servicing department. The data is
reported on the plate shown in fig. 1.7.1. As a memorandum, we suggest reporting
the data for the machine you have purchased in the table below:
Meatgrinder model………………………..
Serial number…………………………….
Year fo manufacturing……………………...
Type………………………………………...