5
Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW
Enquiries: 0344 482 9700
www.bergmantools.com
TROUBLE SHOOTING
Description
Possible Cause
Solution Suggestion
Lithium battery power indicator flickering Low battery
Battery Charging
No power on after machine on
Low battery
Battery Charging
Stop working unexpectedly
High temperature, automatic protection
Turn on after the heat temperature drops
Battery not charging
The battery and charger are not
connected.
Reinsert the battery into the charger to
make sure the connection is good.
The charger is not connected to the
power supply.
Check to see if the LED is illuminated on
the charger (if LED is not lite, there is no
power to the charger, try a different wall
socket.
Low water flow
Blocking of the filter
Clean the filter and water inlet filter
Water inlet pipe is folded
Unfold or replace the water pipe
Impurities in water
Change it into clean water
Blocking of the jet pipe
Clean the jet pipe
No water suction
Wrong connection of the water pipe
connector and water inlet
Connect the inlet pipe connector to the
machine water inlet in place
The water pipe filter is not fully inserted
into the water
Insert the water pipe filter fully into the
water
The water inlet seal ring is off or
damaged
Install or replace the seal ring
Long waiting time for water coming out
The cleaner is on Eco mode
Switch to Auto mode
Low water flow
Refer to the solution of low water flow
Leakage of water outlet
jet pipe or extension pipe is not installed
in place
Install the jet pipe with extension pipe or
the cleaner host in place
