22
GB
Step 5: After using the power station, lightly
press the ON/OFF button to switch off.
Step 6: When the capacity is used up or the
remaining capacity is too low, recharge the
power station for the next use.
4.3 CHARGING THE POWERSTATION
You can use the following methods to charge the Powerstation:
1. use the standard mains adapter, to do this connect the mains cable to the adapter, on the
other side connect the DC plug to the input charging socket of the Powerstation, then plug
the 230V mains plug into a 230V household socket.
+
=
2. charging with the car charging cable: after you have started the car, plug the 12V con-
nector into the 12V socket of the car, the other side connects to the input connector of the
powerstation.
3. solar charging - if you use a solar panel to charge the Powerstation, connect the supplied
adapter cable to the solar cable of the solar panel, then connect the other side of the adapter
to the input connector of the Powerstation (please make sure that the maximum voltage of
the solar panel is not more than 40V and the minimum voltage is not less than 29.4V).
Note:
1. our standard power bank can only be used in our power station, please do not use it on
other devices and keep it away from rain.
2. when using car charging and solar charging, please make sure the positive and negative
connections are correct.
3. if the portable power station is not used for a long time, the built-in battery will discharge
and may be damaged. Therefore, please charge the power station every 3 months.
