18
6.5.4 Polarity
IR 518CC uses different gray level to indicate different temperature. Under positive polarity mode,
brighter part represents higher temperature. While under negative polarity mode, brighter part repre-
sents lower temperature. When no menu displays, short press “M” to switch between 2 polarity
modes .
White Hot
Black Hot
6.6 Freeze and save the infrared image and video
6.6.1 Freeze and save the infrared image
Before taking photo, firstly aim to the target and adjust the focus, then
keep the thermal imager body stable, so as to obtain a clear image,
when no menu displays, press“-”to freeze infrared image and save it
into the built-in SD card, there is indication of the file name on the
upper left side of the screen. After saving, the thermal imager will return
to the real time infrared image status.
6.6.2 Take and save the infrared video
When no menu displays, long press“-”to take infrared video, and save
it in the built-in SD card.IR518C shows the recording time that left ac-
cording to the memory space.
In the above picture, the file name, recording time and left recording
time are displayed. Long press “-” to stop the video taking.
6.7 Infrared image and video playback
Choose “Replay” then press“M”to enter the below interface.
User operate according to the indication,
press“+”to enter the interface shown
below.
According to the indications,
press“+”
、
“-”to browse infrared
images, press “M”to enter the
interface that shown below.
Three operations can be done according to the indications shown in
the above picture:
1) Press“M”to exit playback menu and back to live infrared image.
2) Press“+”to return image playback menu.
3) Press“-”to enter “image delete” menu.
