HYDRONIC UNIT
13
Programming the Touch ‘N’ Go
function
The Touch ‘N’ Go function on your ther-
mostat is tied to the following keys:
HOme
( ),
aWaY
(
) and
NIGHT
(
) which are immediately beneath the
display. These are used to select the
three programming options.
The simple programming option
prompts you either to accept the de-
fault temperature settings for when you
are at home, away or at night, or to set
your favourite Touch ‘N’ Go tempera-
ture when operating in heating mode
and when operating in cooling mode.
In both cases, your home ( ), away (
) and night (
) settings are automat-
ically connected to one of the six time
periods that are set by default (and can
be modified) in the thermostat.
Below are the temperature values set
by default for the periods: at home ( ),
away (
) and at night (
).
Touch ‘N’ Go option
Hot
Cold
Home
20°C
24°C
Away
15°C
28°C
Night
18°C
26°C
Use this blank table to note the temper-
atures required for your home.
You can allocate time periods to these
temperatures later.
Touch ‘N’ Go option
Hot
Cold
Home
Away
Night
