Beretta 20171580, Руководство по установке

Страница: 4 / 25

1 | General information
4
1
General information
1.1
General Notices
When you get the product, check immediately that the contents are
all present and undamaged. Contact the dealer if you
notice any problems.
The product' s installation must be carried out by an authorised
company that will issue a declaration of the installation's
conformity to the product's owner once the work has been
completed, indicating that the work has been carried out in
accordance with the standards of good practice, current National
and Local regulations, and the indications provided by in
the instruction booklet accompanying the device.
The R32 refrigerant gas is slightly inflammable and odourless.
Carefully read the safety data sheet available from the dealer and
see table .
The product must be used for its intended purpose, as stated by
for which it has been expressly manufactured.
shall bear no responsibility, whether of a contractual or
non-contractual nature, for any damage caused to people,
animals, or property due to incorrect installation, adjustments, or
maintenance, or improper use.
Suitable clothing, instrumentation, and accident-prevention devices
must be utilized during the installation and/or maintenance
operations. shall bear no responsibility for any failure to
comply with current safety and accident-prevention regulations.
During installation and/or service operations, keep the area around
the unit tidy and clean.
Comply with the legislation in force on the country of deployment
with regard to the use and disposal of packaging, of cleaning and
maintenance products and for the management of the unit's
decommissioning.
Any repair and maintenance interventions must be carried out by
Technical Support Service, in accordance with the
provisions contained in this publication. Do not modify or tamper
with the unit as dangerous situations may arise and the unit
manufacturer will not be liable for any damage caused.
In the event of any functional anomalies or fluid leaks, set the
system's main switch to its "off" position. Promptly contact your
local Technical Support Service, and do not perform any
interventions upon the device on your own.
The units contain refrigerant gas: operate carefully so as to avoid
damaging the gas circuit and the fin bank.
Any gas leaks indoors can generate toxic gases if they come into
contact with naked flames or high temperature bodies, in case of
leaks, please air the rooms thoroughly.
Do not place any inflammable object (spray cans) within a 1 metre
radius from the air expulsion.
According to EU Regulation no. 517/2014 regarding certain
fluorinated greenhouse gases, the total amount of refrigerant
contained within the installed system must be indicated. This
information can be found on the unit technical data plate.
This unit contains fluorinated greenhouse gases covered by the
Kyoto protocol. Maintenance and disposal activities must be
carried out exclusively by skilled personnel.
This booklet is an integral part of the device, and must therefore be
carefully preserved, and must ALWAYS accompany it, even in the
event that it is sold to another Owner or User, or is transferred to
another system. If it is damaged or lost, another copy can be
requested to Technical Support Service in your Area.
1.2
Safety precautions
It should be noted that the use of products that utilize electric energy
requires certain essential safety regulations to be respected, including
the following:
Do not allow children or unassisted disabled people to use the unit.
Do not touch the unit while barefoot and/or partially wet.
Do not spray or throw water directly on the unit.
It is strictly forbidden to touch the coil fins, the moving parts, to
place any body parts between them, or to insert pointy objects into
the grilles.
It is forbidden to perform any technical interventions or cleaning
operations before having disconnected the device from its
electrical power supply, by setting the system's main switch to its
"OFF" position.
It is forbidden to modify the safety or regulation devices without the
authorisation of the manufacturer.
Do not pull, detach or twist the electrical wires coming out of the
unit, even when the unit is disconnected from the power grid.
The packing material must not be disposed of in the surrounding
environment and must be kept out of children reach, as it can be
dangerous. It must be disposed of according to the regulations in
force.
1.3
Unit description
BREVA IN is an indoor unit for ceiling installation, suitable for
use in residential and light commercial premises in combination with
the outdoor unit. The multiple-speed fan DC motor improves
performance and sound comfort.
Control, regulation and programming of the unit are carried out by
means of the infra-red remote control, whose functions and use are
detailed in the user manual.
1.4
Safety and adjustment devices
The device safety and setting are achieved thanks to
– heat exchanger temperature sensor transmitting the detected
value to the control panel, which is trigged in case of abnormal
temperature with regard to the operating mode
– room air temperature sensor transmitting the detected value to
the control panel in order to control the operation of the outdoor
unit and regulate the room temperature
Safety device replacement must be carried out by
Technical Support Service, using only original components.
Please refer to the spare parts catalogue.
IT IS FORBIDDEN to operate the device with faulty safety
systems.