Bercomac 700512-3-66, Руководство пользователя

Страница: 9 / 44

7
ASSEMBLY
SNOWBLOWER PREPARATION:
Refer to parts breakdown section for parts
identification.
Install the nylon rotation ring
Install the chute
Install the rotation ring
Install the nylon rotation ring (item 1) over the
opening (item 2) as shown and align the notches.
Install the rotation ring (item 1) over the opening as
shown.
NOTE: Place grooves of the rotation ring on the teeth
of the rotation motor as shown.
Install the chute (item 1) over the nylon rotation ring
(item 2). Turn the chute to make sure it turns freely.
Place the chute at a 45° angle as shown.
Insert the hex bolts 1/4’’ x 1’’ (item 3) under the
rotation ring (item 6) in each hole as shown. Insert the
spacers (item 4) on the hex bolts between the rotation
ring and the chute.
Secure in place with the 1/4’’ nylon insert lock nuts
(item 5).