Bercomac 700512-3-66, Руководство пользователя

Страница: 15 / 44

13
Connect the wire connector on the motor for the chute
deflector (item 1)
There will be one black connector that will not be
connected. This is to connect the optional
snowblower light.
Make sure the connectors are well connected
together and tie the wire that is connected to the
motor of the deflector (item 1) with a nylon tie wrap on
the motor in such a way that the wire does not come
into interference with the chute’s rotation.
Secure the wires as shown
ASSEMBLY
Turn the chute to its maximum towards the right.
Secure the wire of the motor for the deflector with a cou-
ple of tie wraps (item 2 & 3) as shown.
Be sure to leave enough wire length to be able to turn
the chute freely.
IMPORTANT: Take the time to familiarize yourself
with the location of the switches and with their use.
NOTE: I f the switches don’t match the right controls,
reconnect the connectors with the right motors.
DANGER: Always make sure that all the guards are
installed before starting the snowblower engine.
DANGER: I t is the responsibility of the person who
installs the accessory to make sure the engaging
system works well and that the snowblower
disengages effectively at all times. It is imperative to
make the necessary adjustments if applicable.
Identification of the switches:
1. Emergency kill switch. (
Pull out to start) .
2. Joystick to move the chute and the deflector.
3. Switch to activate the electric clutch.
4. Switch for optional light kit.
Identify the controls.
DANGER: For the next manipulations, make sure to
clear the area in front of the snowblower and the
outflow of the chute of all people or objects.
1. Manipulate the four position switch (item 2
) and
make sure the chute deflector and rotation works
well.
2. Activate the electromagnetic clutch switch (item 3).
Make sure the clutch engages and disengages.
3. Engage the electromagnetic clutch. Try to start he
snowblower engine. Make sure the engine does
not start.
4. Disengage the electromagnetic clutch. Try to start
the snowblower engine. Make sure the engine
starts.
5. While the engine is running, activate the kill switch
(item 1). Make sure the engine stops. Deactivate
the kill switch by turning it clockwise.
6. If the snowblower is equipped with a light, activate
the light switch (item 4) make sure it activates the
light.