Bercomac 700360-6, Руководство пользователя

Страница: 13 / 36

11
Adjust skid shoes
Install the winch hook
Install the turnbuckles
ASSEMBLY
VERIFY SKID SHOE ADJUSTMENT:
LEVEL PAVED SURFACE: Adjust skid shoes to allow
3/16" to 1/4" or 5mm to 7mm clearance (A) between
cutting edge and surface.
UNEVEN OR GRAVEL SURFACE: Adjust skid shoes
to allow 1/2" to 5/8" or 13mm to 16mm clearance (A)
between cutting edge and surface.
Install the turnbuckles (item 1) into the brackets or
into the lift straps.
# Item Description Action
1 Turnbuckle
(qty 2)
Adjust them so that the
subframe is centered
under the vehicle .*
*Tighten the turnbuckles firmly in order to tighten the
vehicle's suspension.
IMPORTANT: After adjusting the turnbuckles, tighten
the nuts on the vehicle’s suspension arms firmly.
Make sure to lock the nuts with the original locks.
Attach the vehicle ’s winch’s hook on the lever rod
# Item Description Action
If the vehicle's winch is
higher than 20" (510mm) from the ground,
1 Sleeve Install in the top hole
of the lever.
If the vehicle's winch is
lower than 20" (510mm) from the ground,
1 Sleeve Install in the bottom
hole of the lever.
2 Hex bolt 1/2" x 2
1/4" and nylon
insert lock nut
Tigten firmly.
Vehicle’s winch’s
hook .
Install on the lever
rod as shown.
Tip: Thread the winch’s hook in front of the lever as
shown and then thread the cable over the sleeve.