Bercomac 700282-1, Руководство пользователя

Страница: 8 / 24

6
Install the right support (item 1) assembly by sliding
the end of the arm (item 2) into the sleeve welded
inside the left support.
Secure with two 5/16 x 3/4” hex bolts (item 3) and
flange nuts. Do not tighten.
Reinstall the anti-rotation support (item 5) previously
removed and secure on the right support (item 1) with
two 5/16 x 3/4” hex bolts (item 4) and flange nuts.
Do not tighten.
Install the handle grip (item 6) on the lift arm.
Remove the two oscillating axle stopper bolts on the
front (item 1).
Install the front support (item 2) in front of the frame
axle support using the stopper bolts just removed.
Make sure the sleeves are well placed in the axle
before securing the bolts.
Do not tighten.
Install the rear part of subframe (item 1) between the
supports (items 3 & 4) using the pin (item 2) and
secure in place with two 2.5 mm hair pins (item 6).
Attach the front portion to the support (item 5) using
two 1/2 x 1 1/4” hex bolts, (item 7), lock washers and
nuts.
Tighten all bolts firmly.
ASSEMBLY
Install the front support
Install the right support
ASSEMBLY
Install the subframe