Bercomac 700282-1, Руководство пользователя

Страница: 17 / 24

15
MAINTENANCE & DISMOUNTING
MAINTENANCE
a) Check mounting bolts at frequent intervals for
proper tightness to be sure equipment is in safe
working condition.
b) Apply oil at all pivot points.
DRIVE MECHANISM DISMOUNTING
SEE ATTACHMENT OWNER'S MANUAL
(SNOWBLOWER, BROOM AND BLADE) FOR
DISMOUNTING INSTRUCTIONS.
a) Dismount the attachment.
b) Remove the rear counterweight when you remove
the front attachment.
c) Dismount the drive mechanism by supporting it in
hand and removing the hair pin and the pin.
Carefully lower to the ground. Remove the V-belt
from engine pulley.
Manual
clutch:
Remove the cable shield from the slot by
unscrewing the nuts and remove the cable. Pull out
drive mechanism from underneath tractor.
d) You may leave the subframe on tractor all year long
or remove it if preferred.
e) Reinstall mower if needed.
BELT REPLACEMENT
Drive Mechanism Belt:
Dismount the drive mechanism.
Remove the bolt which retains the tension pulley.
Replace the belt and re-install the tension pulley.
Before tightening make sure the belt guide does not
touch the belt at any time. Re-install the drive
mechanism.
Manual Clutch:
With the engine stopped, engaged and disengage
the clutch and make sure the belt does not come
into contact with the belt guide.
Electric Clutch:
Make sure the belt does not come into contact with
the belt guide.
END OF SEASON STORAGE
a) Clean and paint all parts from which paint has
worn.
b) Apply oil at all pivot points.
c) Inspect and replace all defective parts before
using again.