background image

SAFETY PRECAUTIONS 

TRAINING 

 
This symbol, "Safety Alert Symbol", is used 
throughout this manual and on the attachments 
safety labels to warn of the possibility of serious 
injuries. Please take special care in reading and 
understanding the safety precautions before 
operating the attachment or the tractor. 
 

1.  Read this owner's manual carefully. Be thoroughly 

familiar with the controls and proper use of the 
tractor and attachment. Know how to stop the unit 
and disengage the controls quickly. 

 
2.  Never allow children to operate attachment nor the 

tractor. Never allow adults to operate attachment 
nor the tractor without proper instructions. 

 
3. No one should operate the tractor nor the 

attachment while intoxicated or while taking 
medication that impairs the senses or reactions. 

 
4. Keep the area of operation clear of all persons, 

particularly small children and pets. 

PREPARATION 

 
1.  Thoroughly inspect the area where the attachment 

is to be used and remove door mats, all foreign 
objects and the like. 

 
2.  Disengage all clutches and shift into neutral before 

starting engine 

3. Do not operate the attachment without wearing 

adequate garments. Avoid loose fitting clothing that 
can get caught in moving parts. Wear footwear that 
will improve footing on slippery surfaces. 

4.  Handle fuel with care, it is highly flammable. 

a)  Use approved fuel container. 
b)  Never add fuel to a running engine or hot 

engine. 

c)  Fill fuel tank outdoors with extreme care. Never 

fill fuel tank indoors. 

d)  Never fill containers inside a vehicle, or on a 

truck or a trailer bed with a plastic liner. Always 
place containers on the ground, away from your 
vehicle, before filling. 

 

Careful operation is your best insurance against an accident. Read this section carefully before operating the tractor 
and attachment. Failure to observe the following safety instructions could result in serious injury. All operators, no 
matter how experienced they may be, should read this and other manuals related to the tractor and attachments before 
operating. It is the owner's legal obligation to instruct all operators in safe operation

9

 

e)  When practical, remove gas-powered equipment 

from the truck or trailer and refuel it on the 
ground. If this is not possible, then refuel such 
equipment on a trailer with a portable container, 
rather than from a gasoline dispenser nozzle. 

f)  Keep the nozzle in contact with the rim of the 

fuel tank or container opening at all times, until 
refuelling is complete. Do not use a nozzle lock-
open device. 

g) Replace fuel cap securely and wipe up spilled 

fuel. 

h) If fuel is spilled on clothing, change clothing 

immediately. 

 
5. Never attempt to make any adjustments while 

engine is running (except where specifically 
recommended by manufacturer). 

 
6. Always wear safety glasses or eye shields during 

operation or while performing an adjustment or 
repairs to protect eyes from foreign objects that may 
be thrown from the machine. 

 

7.  Never modify the attachment or any part without 

the written consent from the manufacturer. 

 

OPERATION 

 
1. Do not run engine indoors except when starting 

engine and transporting attachment, in or out of 
building. Do not operate or let motor run in a 
storage area without ventilation because gas 
contains carbon monoxide which is odourless, 
colourless and can cause death.  

 
2.  Do not carry passengers on attachment or tractor. 
 
3. Take all possible precautions when leaving the 

machine unattended. Lower the attachment, shift 
into neutral, set the parking brake, stop the engine 
and remove the key. Wait for all moving parts to 
stop. 

Содержание 700282-1

























Отзывы: