6
ASSEMBLY
Slide the nylon bushing (item 1) flange first, down the
lift arm (item 2) to the fork (item 5).
Slide the right rear support (item 3) down the lift arm,
and onto the nylon bushing.
Install the handgrip (item 4) on the lift arm.
Install the right rear support assembly with the arm lift
(items 1 & 2) inside the front support (item 3).
Secure the rear end with a 5/16 x 1’’ hex bolt (item 4)
and flange nut.
Install the pivot support (item 5) between the front
supports with a 3/4’’ Ø pin (item 6).
Secure with two 3 mm hair pins.
Tighten all bolts securely and reconnect the safety
switch.
Install support on lift arm
Install rear and pivot support
