7
ASSEMBLY
Align the subframe (item 1) under the snowblower and
hold in place with the bolts (item 2) you removed and
the two 7/16 x 1 1/2’’ hex bolts (item 3).
Install the right and left spring links (item 8) on the
inside of frame and under the two attaching flat bars as
shown. Secure with the four 7/16’’ nylon insert lock nuts
you removed.
Tighten firmly.
Add a 5/16’’ hex. nut (item 4) on each eye bolt (item 5).
Tighten about half way down.
Insert the spring (item 7) into the spring link (item 8) as
shown.
Hook the other end of spring into the eye bolt and insert
it into the hole (item 9) .
Add a 5/16’’ nylon insert lock nut (item 10) and tighten
to apply tension on the spring.
Assemble subframe to snowblower
Remove bolts and spring links
STEP 2
SNOWBLOWER PREPARATION:
Remove the two 7/16 x 2’’ hex bolts (item 1), the right
and left spring links (item 2).
Содержание 700360- 700360-2
Страница 18: ...16 PARTS BREAKDOWN NOMENCLATURE DES PIÈCES ROTATION SYSTEM WITH CHUTE SYSTÈME DE ROTATION AVEC GOULOTTE ...
Страница 20: ...18 PARTS BREAKDOWN NOMENCLATURE DES PIÈCES SADDLE ASSEMBLY SELLE ASSEMBLÉE ...
Страница 22: ...20 PARTS BREAKDOWN NOMENCLATURE DES PIÈCES SNOWBLOWER SOUFFLEUSE ...
Страница 26: ...24 PARTS BREAKDOWN NOMENCLATURE DES PIÈCES SUBFRAME SOUS CHÂSSIS ...