Berbel Moveline BTH 100 ML, Инструкции по эксплуатации и монтажу

Страница: 11 / 36

11
Installation
6004067_a – 01.08.2018
EN
3.5 Installation procedure
Short overview:
1. Preparation for installation
2. Unpack the device
3. Check dimensions
4. Move fan box (optional)
5. Install filter (with recirculating or hybrid operation)
6. Install the device
7. Install the hob
8. Connect accessories
9. Connect exhaust air ducting (with exhausted air or hybrid
operation)
10. Establish electrical power supply
11. Check and carry out commissioning
3.5.1 Preparation for installation
The device is designed for installation in kitchen units.
The installation sequence may vary, depending on the local
conditions.
☞
Familiarise yourself with the installation situation and the
associated documents.
y Device and instructions.
y Accessories.
y Installation location.
y Intended operating mode.
y Order documents.
y Dimensions, position and alignment of the
components.
☞
Assemble the tools and materials required:
y Set-down area (e.g. trestle)
y Folding rule or measuring tape
y Pencil
y Spirit level
y Phillips head screwdriver, size 2
y Slotted screwdriver SL 2.5 x 0.4
y 2.5 mm Allen key
y 5.0 mm Allen key
y Ø 8 mm masonry bit
y Hammer drill
y Protective material (e.g. thick cardboard) for the hob
and the worktops
☞
Keep the installation area free of objects that could be in
the way or that could be damaged.
☞
Make sure that the hob and other parts that could be
touched have cooled down.
☞
Protect the hob and other surfaces in the installation area
(e.g. with thick cardboard).
☞
Ensure that the power supply is switched off and remains
so. Connect the power supply only when instructed to do
so in the installation instructions.
If accessories (e.g. wall box, window contact switch) are
required for the installation:
Observe the instructions for the accessories.
☞
Ensure that the accessories are correctly installed and
ready for connection.
☞
Ensure that the connection cables from accessories are
correctly routed and accessible.
The fastening material is only suitable for fastening to
wooden work tops. With different installation situations
(e.g. granite work tops) it is necessary to clarify the means of
fastening.
With installation of the device in a kitchen unit:
☞
Make sure that the kitchen units are equipped with
ventilation slots (e.g. with a ventilation grill).
D
“9.2 Accessories” (page 34).
3.5.2 Unpack the device
D ATTENTION!
Hazard of glass breaking or other damage due to
incorrect handling!
The device and its surfaces can be damaged when being
unpacked or transported.
☞
Do not cut into the protective cardboard packaging.
☞
Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).
☞
Unpack the device and all accompanying parts carefully.
☞
Set the device down with the hob facing upwards on a
firm, clean and protective surface (e.g. thick cardboard).
☞
Check the device and its constituent parts for damage.
☞
Check the delivery is complete.
D
“2.5 Scope of delivery” (page 7).
If parts are missing or damaged:
☞
Please consult your dealer or customer services.
☞
Remove the packaging material.
D
“8.1 Dispose of packaging” (page 32).