Berbel Moveline BTH 100 ML, Инструкции по эксплуатации и монтажу

Страница: 13 / 36

13
Installation
6004067_a – 01.08.2018
EN
3.5.4 Move fan box (optional)
The fan box is pre-assembled in accordance with the order.
This assembly step is only necessary if the position of the fan
box must be retrospectively changed for installation in the
kitchen.
☞
Check whether the fan box is correctly positioned and
aligned.
Change the fan box position - front/rear
The position of the fan box can be changed if necessary.
To do this, unscrew the fan box and the middle trim panel
and replace.
D ATTENTION!
Danger of property damage through improper handling!
When disassembling the fan box it is possible to tear off
the pre-connected connection cables and damage the
connections.
☞
Loosen the connections carefully, without twisting the
plug.
☞
Carefully remove the fan box without straining the cables.
☞
After disassembly, refit the fan box such that the cables
are not kinked, crushed or damaged.
☞
Unscrew the screws on the middle trim panel on the side
without the fan box.
☞
Release the connections for the fan box in the hood body.
☞
Unscrew the screws on the fan box.
☞
Lift the fan box away from the hood body.
☞
Change the position of the trim panel and fan box.