Berbel Emotionline BWH 120 EL, Инструкции по эксплуатации и монтажу

Страница: 22 / 36

22
Operation
6004347_0 – 27.09.2018
4.2.2 Extraction mode / recirculated air mode
changeover
If the device is configured for hybrid mode, it is possible to
switch between extraction mode and recirculated air mode
at any time after activating the changeover function.
The changeover function is activated in configuration mode.
D “4.3 Configuring the device” (page 24).
Button Function
If the changeover function is activated:
☞
Touch the button one time.
Button glows dimly:
y
The device operates in extraction mode.
y
The wall box is opened.
y
The cleaned air is discharged outdoors.
Button glows brightly:
y
The device is operating in recirculated air
mode.
y
The wall box is closed.
y
The cleaned air is discharged into the
room.
4.2.3 Filter filling indicator
The device has a control indicator to remind the operator
to change the filter filling. If no air circulation filter is used,
the control indicator has no meaning.
The control indicator flashes every 1,000 operating hours.
The hours counter is started anew by switching off the
control indicator.
The control indicator is switched off in configuration mode.
D
“4.3 Configuring the device” (page 24).
Button Function
Button flashes:
The filter filling must be replaced.
D
“6.2.2 Replacing filter filling (with
recirculating and hybrid mode)”
(page 27).
4.2.4 Cooktop lighting
The cooktop lighting is equipped with energy-saving LEDs.
The lighting can be used independently of the fan.
It can be switched on when the device is on. It can be
switched off at any time.
The colour temperature is set in configuration mode.
D “4.3 Configuring the device” (page 24).
Button Function
☞
Press the button once to switch the
cooktop lighting on or off.
4.2.5 AutoRun
Devices equipped with the AutoRun module start
automatically when the cooktop is turned on. When the
cooktop is turned off, the device switches to run-on function
and then switches off.
The AutoRun automation is set in configuration mode.
D
“4.3 Configuring the device” (page 24).