24
Operation
6004347_0 – 27.09.2018
4.3
Configuring the device
Button
Function
The device is turned off.
☞
Touch the button once for more than
10 seconds.
All buttons flash five times.
The device switches to configuration mode.
The configuration mode is turned on.
To exit the configuration mode:
☞
Touch the button one time.
The settings are now saved.
The device is in normal mode again.
If no entry is made for 120 seconds,
configuration mode is automatically exited.
In configuration mode, the following functions can be set
by touching the corresponding button.
Button
Function
AutoRun.
As delivered, the function is turned on.
☞
Touch the button one time.
Button glows brightly:
The AutoRun automation is activated.
☞
Touch the button one time.
Button glows dimly:
The AutoRun automation is deactivated.
Extraction mode / recirculated air mode
changeover.
As delivered, the function is turned off.
☞
Touch the button one time.
Button glows brightly:
The changeover function is activated.
☞
Touch the button one time.
Button glows dimly:
The changeover function is deactivated.
Button
Function
Filter filling indicator.
The function is set so that the button flashes
every 1,000 operating hours (flash duration
120 seconds) as soon as the device is turned
off.
When the filter filling has been changed:
☞
Touch the button one time.
Button glows brightly:
The hour counter restarts, and the flashing
indicator turns off.
Automatic run-on.
As delivered, the function is turned on.
☞
Touch the button one time.
Button glows brightly:
Automatic run-on is activated.
☞
Touch the button one time.
Button glows dimly:
Automatic run-on is deactivated.
Содержание Emotionline BWH 120 EL
Страница 34: ...34 6004347_0 27 09 2018 ...
Страница 35: ...35 6004347_0 27 09 2018 ...
Страница 36: ...6004347_0 27 09 2018 ...