Berbel Downline BKF 83 DL-A, Инструкции по эксплуатации и монтажу

Страница: 37 / 40

37
Disassembly
6004977_a – 28.02.2020
EN
7. Disassembly
D
WARNING!
Danger of injuries through improper handling!
Disassembly of the device requires a great deal of physical
exertion due to its size and weight. If the device falls down,
serious injuries are possible.
☞
Disassemble the device with two persons.
☞
Ensure stable footing during disassembly.
☞
Ensure that no other people are in the working area.
D ATTENTION!
Danger of property damage through improper handling!
Disassembly of the device requires a great deal of physical
exertion due to its size and weight. If the device falls, the
device, kitchen furnishings and other objects could be
damaged.
☞
Keep the installation area clear.
☞
Disconnect all poles of the power supply for the device.
If present:
☞
Remove any accessory connection cables.
In extracted air mode:
☞
Remove the exhaust air duct.
In recirculated air mode:
☞
Remove the recirculated air filter.
☞
Disconnect the connecting cable from the power supply.
☞
Release the device fastening to the work top.
If present:
☞
Remove the blow-out grate and brackets.
☞
Remove the sealing strip.
☞
Release the fastening of the duct bend on the hob.
☞
Remove the components of the fan housing (e.g. duct
bends, shallow duct sections).
☞
Remove the recirculated air filter.
☞
Lift the device with two persons.
☞
Lift the device up and off the work top.
☞
Set the device down on a firm and protective surface.
8. Disposal
8.1 Dispose of packaging
D ATTENTION!
Risk of environmental damage due to improper disposal
of the packaging!
☞
Do not put the packaging into the normal household
waste.
☞
Take the packaging for environmentally friendly and
proper recycling.
The packaging provides protection from transport damage.
Only the original packaging guarantees sufficient protection
during transportation.
☞
Store the packaging in a location which is inaccessible to
children.
The packaging materials have been selected from an
environmentally friendly perspective and are made from
re-usable materials. The packaging materials can be returned
to the raw materials cycle after use. This saves valuable raw
materials.
y The outer packaging is made from cardboard.
y The filling material and the insets are made from
cardboard or polythene (PE).
y The protective film and bags are made from
polythene (PE).
☞
Dispose of the packaging in an environmentally friendly
manner, separated by materials.