Berbel BLB 60 Скачать руководство пользователя | Manualshive

Страница: 39 / 81

background image

Safety

5

Safety

Read through this chapter carefully before installing,
using or cleaning the device.

¾

Observe all information on dangers during all
activities on the device.

¾

Enclose these instructions if you pass the device
on.

Proper use

The device can be used to extract cooking vapours
during cooking.

The device is exclusively intended for this purpose
and must only be put to this use. The device must
only be used in the manner described in these
instructions.

Any other use or modification of the device is
regarded as improper and may lead to damage.

The manufacturer accepts no liability for damage
caused as a result of improper use, incorrect
installation or incorrect operation. The device is not
intended for commercial use. Use the device in
private kitchens only.

Ban on independent conversions and

modifications

•

Do not undertake any independent conversions or
modifications on the device. Conversions or
modifications without the approval of berbel
Ablufttechnik GmbH are impermissible.

•

Never bridge or bypass the protective facilities
available on the device.

Basic safety instructions

This section contains basic safety instructions for
handling the device. Additional safety instructions
which affect certain actions and procedures can be
found in the relevant chapters.

•

Heed all of the safety instructions and information
on dangers in these instructions.

•

Check the device and all parts for visible damage.
In the event of damage, contact your specialist
dealer or the berbel customer service. The device
must only be used in flawless condition.

•

Always have repair and maintenance work carried
out by qualified, specialist personnel. Otherwise,
you endanger yourself and others.

•

Install the device with the enclosed brackets
exclusively on load-bearing parts of buildings
(solid construction).

•

In the case of other mountings, use
correspondingly suitable mounting techniques. If
in doubt, ask your specialist dealer. Otherwise,
you endanger yourself and others.

•

Use the device in private kitchens only.

«
...
37
38
39
40
41
...
»

Содержание BLB 60


















































































Отзывы:

Нет отзывов

Похожие инструкции для BLB 60

Бренд: Faro Страницы: 16

Бренд: Parrot Uncle Страницы: 4

Eco Silent Deluxe DC

Бренд: Fanco Страницы: 16

Бренд: Harbor Breeze Страницы: 19

Бренд: Mistral Страницы: 5

Бренд: OYPLA Home Страницы: 7

Бренд: Levante Страницы: 4

Бренд: Harmann Страницы: 11

Бренд: Salton Страницы: 7

Бренд: Parrot Uncle Страницы: 16

Бренд: Sonnenkonig Страницы: 40

Бренд: Middle Atlantic Products Страницы: 11

CONCEPT II F518

Бренд: Minka-Aire Страницы: 23

Бренд: Airzone Страницы: 70

Бренд: Hitecsa Страницы: 18

Бренд: HAMPTON BAY Страницы: 19

Бренд: Manrose Страницы: 5

Бренд: QuietCool Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды