Berbel BLB 60, Руководство по эксплуатации

Страница: 27 / 81

Maintenance
27
Removing the recirculating air filter
Proceed as follows to replace the filter filling:
¾
Pull the filter out upwards using the folding
handle.
Replacing the filter filling
¾
Replace the filter filling.
Replacement of the filter filling is described
separately in the operating instructions for the
filter filling.
Installing the filter
To ensure that the filter is installed correctly, an
approx. two centimetre-high guide aid is
installed on the seat of the filter.
¾
Position the filter on the device from above.
The filter is correctly inserted when the lower edge
lies fully on the device.
¾
Make sure that the filter is inserted correctly.
The filter is installed correctly. If the filter is not
installed correctly, proceed as follows:
¾
Remove the filter.
¾
Position the filter again.