Beper RI.432, Инструкция по использованию

Страница: 9 / 24

ENGLISH
Electric hot water bag Use instructions
9
USE ADVICE
Check that the mains voltage corresponds to the data specified on the label; if
any doubt please contact a professional qualified.
In case of damage of the cord supply, do not charge the electric hot water bag
and make it replaced by the authorized assistance centre.
Do not leave the electric hot water bag connected if not used; always disconnect the plug
from the socket when charge is over.
Keep the cord supply away from hot parts.
Pay attention to not touch the hot part after charging the electric hot water bag.
Do not immerse the hot water bag into water.
The electric hot water bag must be cold when connecting the cord to the socket.
Do not leave the electric hot water bag without supervision while charging.
The electric hot water bag can be stored when completely cool down.
For household use only.
DESCRIPTION
1 – Cover
2 – Charging clip (located on the back)
3 – Red light charge indicator
4 – Green light MAX. temperature indicator
5 – Cord supply
INSTRUCTION USE
The electric hot water bag has been filled with water when manufactured and not need to
be filled for use.
Plug one side of the cord supply (5) to the charging clip (2).
Connect the cord supply (5) to the socket, the red light (3) lights up and indicates that the
hot water bag is charging.
The electric hot water bag has a thermostat for temperature control; when MAX. tem-
perature is reached (75°C) the green light (4) lights up, and indicate that temperature is
reached.
Locate the electric hot water bag on a plane surface when charging.
Disconnect the cord supply (5) from the charging clip (2) and the socket.
The electric hot water bag is ready to use, for approx. 2 hours.
The duration use of 2 hours has been calculated by considering the average parameters
of external temperature and the use. If the appliance is not used correctly the conditions
reduces the duration of heating.