11
Waffle Maker Use instructions
EN
USE
1. Insert the plug in the power socket, the pilot light will come on to indicate that the ap pliance is
switched on.
2. The appliance starts to preheat; when the cooking temperature is reached, then the ready light
will come on and the waffles maker is ready for use.
3. Fully open the waffles maker. Place the waffles you prepared on the baking plate.
4. Close the appliance and check the food during the cooking process.
5. Your waffles will be toasted in 2 to 3 min or longer to suit your taste. Open the waffles maker and
remove the waffles using a plastic or wooden spatula. Never use a metal knife as this may damage
the non-stick coating.
HINTS FOR BEST RESULTS
Always preheat before use. Plug cord into power outlet while preparing the fillings.
Flavoured butter may also be used.
For additional flavour use bacon dripping. Brush drippings on the outside of the bread.
ATTENTION
: This symbol show: Hot surface
ATTENTION
: The temperature of the outer surface may be high when the appliance is operating.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch it off, remove the plug from the outlet and wait for
it to cool.
- Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive pro-
ducts.
- When the appliance is not in use, place it in a dry environment.
- If you decide not to use the appliance anymore, we recommend making it inoperative by cutting
through the power cord (first make sure that you have removed it from the current socket), and ren-
der the parts that are dangerous if used in child’s play innocuous.
- A special tool is required to replace the power cord: take the appliance to a qualified after-sales
centre.
TECHNICAL DATA
Power: 700W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.