12
Lunch box Use instructions
56. Do not use the appliance if the power cord or plug is damaged or
if the appliance itself is faulty. If the power cord is damaged, it must
be replaced by a new cord or special assembly, by the manufacturer
or its technical assistance
service.
57. Always unplug the power cord from the electricity mains before
mantainance or before cleaning the appliance.
58. Make sure that hands are thoroughly dry before touching the plug
or power connections.
59. In case of using extension leads, these must be suitable for the
appliance power to avoid danger to the operator and for the safety
of the environment in which the appliance is being used. Extension
leads, if not suitable, can cause operating anomalies.
PRODUCT DESCRIPTION Fig.A
1. Steam valve
2. Cover lock
3. Handle
4. Spoon storage
5. Body
6. Power light
7. Container wit h 2 compartments
8. Internal compartment with cover
9. Spoon
INSTRUCTION FOR USE:
Before using, wash and dry the plates. Then put the food into the plates.
Insert the plate into the lunch box, then, fasten down the lunch box lid to the lunch box.
Plug in the device
Power indicator lights up and the device starts heating the food
Notice: The heating time depends on food quantity and its initial temperature. Generally 25-40 minu-
tes are enough. At low temperature, i.e. refrigerated food, heating time can increase.
Unplug the device before enjoying the meal.
WARNING
: in order not to damage the device, press the air valve with your fingertip to open when
operating.
THE CONTAINER IS NOT HERMETIC.
CLEANING AND MAINTENANCE
1. The plug must be unplugged after use.
2. Should be cleaned immediately after use for avoiding the odor.
3. Do not use the petrol, cleanser powder, hard brush, stainless steel wire ball to clean the electric
lunch box.
4. It is allowed to put a little warm water to clean inside or use the soft warm cloth to wipe it.
