ENGLISH
4
1) OIL WARNING SYSTEM
When the oil level falls below the lower level, the engine
stops automatically. Unless you refill with oil, the engine will
not start again.
2) ENGINE SWITCH
The engine switch controls the ignition system.
1) “ON”(run)
Ignition circuit is switched on. The engine can be started.
2) “OFF”(stop)
Ignition circuit is switched off. The engine will not run.
3) ECONOMY CONTROL SWITCH
When the economy control switch is turned “ON”, the
economy control unit control the engine speed according to
the connected load. The results are better fuel connection
and less noise.
4) DC CIRCUIT PROTECTOR
El protector del circuito de CC produce una parada
automática cuando la carga sobrepasa la producción nominal
del generador.
CAUTION :
Reduce the load to within specified generator rated output if
the DC circuit protector turn off.
5) FUEL TANK CAP AIR VENTKNOB
The fuel tank cap is provided with an air vent knob to stop
fuel flow. The air vent knob must be turned once clockwise
from the closed position. This will allow fuel to flow to the
carburetor and the engine to run.
When the engine is not in use, tighten the air vent knob
counterclockwise until it is finger-tight to stop fuel flow.
OPEN CLOSED
