Assembly
Carefully unpack each component, checking against the parts list that
you have all the necessary parts to complete the assembly of your
product.
Please note that some of the parts may be pre-fitted to major
components, so please check carefully before contacting our
CUSTOMER SUPPORT team.
In any event, please do not return the product to your retailer before
contacting us first.
CUSTOMER SUPPORT is open from 9.00am to 5.00pm from Monday
to Friday
1. Attach two 50mm Square Foot End Caps (51) to the Rear Frame
Stabiliser (2).
2. Remove two M10 x 20mm Hex Bolts (66) and two M10 Washers (72)
from each Weight Guide Tube(17).
3. Insert two Weight Guide Tubes (17) into the Rear Frame Stabiliser (2),
using two M10 x 20mm Hex Bolts (66) and two M10 Washers (72).
4. Attach the Base Frame (1) to the Rear Frame Stabiliser (2), using two
M10 x 70mm Hex Bolts (63), four M10 Washers (72) and two M10
Nylon Locknuts (76).
5. Slide the Lower Weight Cover Tube (23) onto two Weight Guide Tubes
(17) and secure using two M8 x 16mm Hex Bolts (69).
6. Slide two Rubber Weight Bumpers (46) onto two Weight Guide Tubes
(17).
Beny Sports Co. UK Ltd.
Unit 8 Riparian Way,
The Crossings Business Park,
Cross Hills,
West Yorkshire.
BD20 7BW
Tel:- 0800 3 101 202 or
+44 (0) 1535 637711
Email:- [email protected]
1.
Page
Содержание V-fit-ST CUG-2
