Beny Sports Herculean V-FIT STG/09-2, Руководство пользователя, Страница: 16 / 28

Carefully unpack each component, checking against the parts list that
you have all the necessary parts to complete the assembly of your
product.
Please note that some of the parts may be pre-fitted to major
components, so please check carefully before contacting our
CUSTOMER SUPPORT team.
In any event, please do not return the product to your retailer before
contacting us first.
Tel:- 0800 3 101 202 or
+44 (0) 1535 637711
Email: support@benysports.co.uk
CUSTOMER SUPPORT open from 9.00am to 4.30pm
from Monday to Friday
Beny Sports Co. UK Ltd.
Unit 8 Riparian Way,
The Crossings Business Park,
Cross Hills,
West Yorkshire.
BD20 7BW
Do NOT FULLY TIGHTEN any
Bolts, Nuts or Fittings at this
stage unless specifically
instructed to do so.
Note
1. Attach two 50mm Square End Caps (58) to the Base Frame (2). Attach three
50mm Square Foot End Caps (57) to the Back Base Frame (3).
2. Remove the M10 x 20mm Hex Bolts (69) and M10 Washers (77) from the
bottom of both Weight Guide Tubes (15).
3. Insert the Weight Guide Tubes (15) into the Back Base Frame (3), refitting the
two M10 x 20mm Hex Bolts (69) and two M10 Washers (77) previously removed.
4. Attach the Front Base Frame (1) to the Base Frame (2), using two M10 x 70mm
Hex Bolts (63), four M10 Washers (77) and two M10 Nylon Nuts (83).
5. Attach the Base Frame (2) to the Back Base Frame (3), using two M10 x 70mm
Hex Bolts (63), four M10 Washers (77) and two M10 Nylon Nuts (83).
6. Slide two Rubber Cushions (43) onto the Weight Guide Tubes (15).
Page 1